Keg Washer Filler
The Brewology Keg Washer Filler provides a production efficient system for washing, sterilising and filling numerous kegs an hour (see specifications below).
Main features
-
Minimal manual handling
-
High specification washing and filling
-
Clamping neck jaws for safe operation
-
Full electronic control and monitoring
-
Keg in position sensor
-
Keg head seal check
-
Ullage duty reclaim
-
Pre-wash and hot detergent wash
-
Detergent monitoring
-
Hot rinse with recovery
-
Steam and CO2 purge
-
Meter fill and electronic back pressure flow control
How does it work?
-
The operator loads the keg (neck down) centrally on the rise and fall table.
-
Pressing the two buttons will then start the automated process.
-
The keg clamps lower onto the head via the rise and fall table.
-
The machine then goes through its recipe set timings and parameters, monitoring and controlling pressures, temperature and flow rates to deliver a consistent cleaned, sterilised and filled keg.
-
At the end of the process, the keg neck is washed and sterilised.
-
Then the keg is raised from the keg head and freed to slide from the raised loading table to the conveyor for accumulation and easy full keg handling.
Specifications
-
50L kegs washed, sterilised and filled - 18 per hour
-
30L kegs washed, sterilised and filled - 20 per hour
-
50L kegs washed to stock - 25 per hour
-
50L kegs filled from stock - 70 per hour
-
30L One Way kegs - 70 per hour
More technical information
Read more about this in the provided PDF
Like what you see?