Brewology Keg Fillers are capable of filling up to 70 kegs of various sizes per hour. Our filler prevents leakage, with the product flow meter used to reduce losses.
EK70 - >70 kegs per hour
Sizes - 20L to 50L kegs
Material - Stainless steel
Effectively fills kegs in controlled conditions
Fills all one-way kegs (excluding KeyKegs)
Pressure tests prior to fill
Sealed to prevent leakage
Unique self-clamping head removing top clamps
Product flow meter to reduce losses
Minimal manual handling
Remote diagnostics and software upgrades via the internet
Touch screen - 4.3 colour TFT
Control panel - Stainless steel
Remote support - BrewNet Remote Support as standard (internet connection required)
Manual controls - Run pumps and open valves manually for servicing
Backflush - Automatic backflush of pump filters
Alarms - Easy to understand alarms
How does it work?
The operator loads the keg (neck down) centrally on the rise and fall table.
Pressing the two buttons will then start the automated process.
The keg clamps lower onto the head via the rise and fall table.
The machine then goes through its recipe set timings and parameters, monitoring and controlling pressures, temperature and flow rates to deliver a filled keg.
At the end of the process, the keg neck is washed and sanitised.
Then the keg is raised from the keg head and freed to slide from the raised loading table to the conveyor for accumulation and easy full keg handling.
More technical information
Read more this in the provided PDF
Like what you see?